Home
Printer friendly page Printer friendly page
Home » Departments » Development Services » Building

Building


Building Permits:

  • Applications are available on line here or at the Development Services office located at 439 W. Utah Avenue.

Inspections:

  • Inspection requests may be made by calling 465-5204/5214.
  • Inspection requests must be made 24 HOURS in advance. This does not guarantee next day inspections. Be prepared to give the permit number, address, type of inspection, contact name and number. Job sites must be ready for inspection by 8:30 am the requested inspection day.
  • A re-inspection fee of $50 will be charged if approved plans are not on the job site for each inspection.
  • A re-inspection fee of $50 will be charged if the PERMIT CARD is not posted at the job site. PERMIT CARDS are to be displayed on a post until a window is available. Replacement cards can be picked up at the Development Services Department office, if lost or damaged, at no additional cost.
  • A re-inspection fee of $50 will be charged if the job site is not ready for the requested inspection, or if the inspector cannot obtain entry to the structure.
  • All re-inspection fees must be paid at the Development Services Department prior to the next re-inspection. Fees will not be accepted at the site.

Landscaping:

  • Residential. Front yard landscaping is required to be installed prior to Final Inspection. If due to inclement weather, the landscaping cannot be completed prior to Final Inspection, a sum, as determined by City Council, to complete the landscaping must be placed in escrow or bonded for at a period not to exceed June 1st of the nearest calendar year.
  • Commercial. All landscaping is required to be installed prior to Final Inspection.

Excavation:

  • All lot corners must be marked with an approved type metal peg at least 5/8" in diameter and twenty-four inches in length prior to any excavation on site.

 

Net Meter Agreement

Applications

Code Information and Handouts

Building a new shed?  Please click here for more information